• This is the default view that opens up when the map is launched.
• Truck icons can be trucks, as shown above, or smaller circles, as shown below. The smaller icons are provided as an option for larger fleets. This setting can be edited by a company Ranger administrator on the Configuration/Company setup/Map options screen.
• Truck labels can use a large font, as shown above, or a smaller font, as shown below. The smaller font is provided as an option for larger fleets. This setting can be edited by a company Ranger administrator on the Configuration/Company setup/Map options screen.

• As noted above, truck icons and labels can be customized.
• Labels can be customized to save space, be more or less descriptive, etc. for the company. If the label is modified on any open map and saved, every map that is opened afterwards will use these new settings.
• The label templates use descriptors, listed below, to determine the position of a piece of data in the label. Every time the map is refreshed, the label is rebuilt according to truck data after that load.

Label templates can be specified for both assigned and unassigned trucks. It may be desirable, for a company with a large number of vehicles on the map, to customize the unassigned truck label to not show the status at all, saving map space.

For truck 101, headed in direction 323 degrees (NW), not currently assigned to a job, and
truck 102, headed in direction 125 degrees (SE), assigned to and enroute to a job:

Template	Display
Assigned: {directionIcon} {truckNumber} - {truckStatus} Unassigned: {directionIcon} {truckNumber} - {truckStatus}	101 - Available 102 - ENROUTE
Assigned: {directionIcon} {truckNumber} - {truckShortStatus} Unassigned: {directionIcon} {truckNumber}	101 102 - E
Assigned: {truckNumber} - {truckStatus} Unassigned: {truckNumber} - {truckStatus}	101 - Available 102 - ENROUTE

• Clicking on a truck icon will show a popup with truck information, as shown above.
• The popup will have three tabs, Overview, Driver, and GPS. Optionally, if the truck is assigned to a job, a fourth Job tab will be displayed.

By default, only one section can be open at a time. Therefore, if no sections are pinned open, when one section is expanded, all others will close. However, the user can control which sections are pinned open.

• Expand section (+ button): drop down the section, and all non-pinned sections will close
• Collapse section (- button): roll up the section
• Pin open section (sideways pin button): click to force the section to stay open, even if any other section is expanded
• Unpin section (upright pin button): click to unpin the button, allowing it to close if any other section is expanded

In the image above, the Zoom/Pan section is pinned open, the Truck types section is expanded, and all other sections are collapsed.

If you expand the job section, and hover the mouse over a job number, a popup will appear with job details.

• Resizing the browser window forces the map to be reloaded, which is a time-consuming operation. We recommend that you set the browser window to the desired size and simply use the Track/Zoom tool to zoom in and out of the map.
• The map appears to work better in Internet Explorer v7.
• Network connection speed and computing power are critical aspects of overall application performance. Network connection speeds can be tested in a Flash-capable browser at:

http://www.dslreports.com/speedtest?flash=1