Differences

This shows you the differences between two versions of the page.

--- support:07_storage-impound:01_lots [2015/09/30 08:42]
seyers
+++ support:07_storage-impound:01_lots [2015/10/26 09:31] (current)
seyers
@@ Line 1: / Line 1: @@
-====== Lots ======
+====== Configure Lots ======
-To set up and configure your lots in Ranger, from the left navigation pane, click on Lot Management, then Configure lots.
+Configuring Lots in Ranger take just a few short steps:
+  - From Main Menu, go to left navigation pane/Lot management/Configure lots
+  - Enter a name for your lot(s), enter the complete address, and Save
+  - Create as many lots as you need.
+  - Dispatcher (or driver) can choose a lot as a tow destination, which inputs the address in Dispatch Direct.
+  - Vehicle automatically placed in Pending area in Lot Management.
-When you reach the Company lot detail screen (see below),
-{{:support:07_storage-impound:configure_lots.png|}}
-  - Type the name of your lot (which will become available when entering a new job in Dispatch Direct) and complete the address, city, state and zip fields. Phone is optional but recommended.  Ranger fills in an Id and the GPS coordinates.
-  - If you do not use this lot as a base from which you dispatch, check the box "Exclude from closest base determination?"
-  - You will notice that Ranger finds the GPS coordinates for the new lot in the Latitude/Longitude fields.
-  - Click the save button at the bottom of the window.

RangerSST Support Center