Differences

This shows you the differences between two versions of the page.

--- support:00_overview:05_device_setup [2013/01/28 11:15]
jshellhaas created
+++ support:00_overview:05_device_setup [2016/02/26 15:36] (current)
seyers
@@ Line 1: / Line 1: @@
 ====== Device Setup ======
+GPS Settings and Ranger App Download
+Before beginning to download apps, install each device’s screen protector, SD card (if used), Otterbox, and **fully charge the phones and/or tablets**.  When devices are charged, power on the device and adjust the Security and Location settings as shown below before continuing.
+.	View all the Apps and tap the Settings icon,
+{{:support:00_overview:settings_icon.png|}}
+.	Scroll and Tap on Security, look under Security on the right side, checkbox tap “Unknown Sources” which will allow installation of non-Market apps (Ranger SST CommLink App).
+{{:support:00_overview:settings-security-unknown.png|}}
+.	Go back to Settings, just above Security tap “Location Sources” and check “Use GPS Satellites.”
+.	Download the Ranger CommLink application:
+  * Go to Applications and tap on the Globe (or go to Internet) to get a browser window.
+  * Type in the following URL:  [[http://www1.rangersst.com/mobile/android]], and click the orange download button.
+. After download is complete, go to the Downloads screen and select the application called “TOW2.apk” and choose “Install.”
+.	After installation, choose done or open.
+.	Please note that the Ranger App uses power and should be closed (settings/applications/running/stop) when not in use.
+. Also note that navigation is a large consumer of battery power; always have a charger in your vehicle.

RangerSST Support Center

User Tools

Site Tools

Differences

Page Tools